A-Neu Video ANI-QUAD-MINI 사용 설명서 - 페이지 8

{카테고리_이름} A-Neu Video ANI-QUAD-MINI에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. A-Neu Video ANI-QUAD-MINI 13 페이지. Hdmi 4x1 quad multi-viewer w/ seamless switcher

페이지 인쇄

WIDEBAND IR (30KHz---60KHz) INTRODUCTION

IR BLASTER (TX):

To control the source: Plug IR Blaster into IR TX port of transmitter unit. Place blaster in front of the IR eye of the source.

IR RECEIVER (RX):

To control the source: Plug IR Receiver into IR RX port of receiver unit. Place receiver at or near display.

DETAIL DESCRIPTION OF DISPLAY MODES

The quad multi-viewer has (3) display modes.

MODE 1

MODE1:

The quad multi-viewer divides the (4) HD inputs into the same size displays on (1) screen. Switch the inputs using the buttons on

the front panel or IR remote, and the HDMI output audio will correspond to the selected input source.

MODE2:

The quad multi-viewer divides the (4) HD inputs into (1) large and (3) smaller picture displays on (1) screen. Switch the inputs using

the buttons on front panel or IR remote, and the bigger picture will correspond to the selected input source. The HDMI output audio follow

the bigger picture source.

MODE3:

The quad multi-viewer will separate and display the (4) HD inputs individually and become a seamless switcher.

CONNECT AND OPERATE

MODE 2

MODE 3