Indesit WITL 1001 사용 설명서 지침 - 페이지 10

{카테고리_이름} Indesit WITL 1001에 대한 사용 설명서 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Indesit WITL 1001 48 페이지.

페이지 인쇄

Care and maintenance

Cutting off the water or electricity supply

• Turn off the water tap after every wash. This will limit the wear

of your appliance's water system and also prevent leaks.

• Unplug your appliance when cleaning it and during all

maintenance operations.

Cleaning your appliance

The exterior and rubber parts of your appliance can be cle-

aned with a soft cloth soaked in lukewarm soapy water. Do

not use solvents or abrasives.

Cleaning the detergent dispenser

Remove the dispenser by raising it and pulling it out (see

figure). Wash it under running water; this operation should

be repeated frequently.

Caring for your appliance door and drum

• Always leave the appliance door ajar to prevent unplea-

sant odours from forming.

Cleaning the pump

The washing machine is fitted with a self-cleaning pump that

does not require any maintenance. Sometimes, small items

(such as coins or buttons) may fall into the pre-chamber that

protects the pump, situated in the lower part of the same.

Make sure the wash cycle has ended and unplug the

appliance.

Disassembly:

Press lightly on the large

button on the front of the

detergent dispenser and pull

it upwards (fig. 1).

Fig. 1

How to clean the detergent dispenser

Cleaning:

Then clean the dispenser under a tap (fig. 3) using an old

toothbrush and, once the pair of siphons inserted in the

top of compartments 1 and 2 (fig. 4) have been pulled

out, check whether the same are not clogged and then

rinse them.

Fig. 2

To recover any objects that have fallen into the pre-

chamber:

Checking the water inlet hose

Check the water inlet hose at least once a year. If you

see any cracks, replace it immediately: during the wash

cycles, water pressure is very strong and a cracked hose

could easily split open.

Never use hoses that have already been used.

Fig. 3

1. remove the plinth at

the bottom on the front

side of the washing

machine by pulling from

the side with your hands

(see figure);

2. unscrew the lid

rotating it anticlock-wise

(see figure): a little water

may trickle out. This is

perfectly normal;

3. clean the interior

thoroughly;

4. screw the lid back on;

5. reposition the panel,

making sure the hooks

are securely in place

before you push it onto

the appliance.

Reassembly:

Do not forget to reinsert

the pair of siphons into the

special housings and then to

replace the dispenser into its

seat, clicking it into place (fig.

4, 2 and 1).

Fig. 4