Indesit WITL 1051 사용 설명서 지침 - 페이지 19

{카테고리_이름} Indesit WITL 1051에 대한 사용 설명서 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Indesit WITL 1051 48 페이지.
Indesit WITL 1051에 대해서도 마찬가지입니다: 사용 설명서 지침 (48 페이지)

페이지 인쇄

Personalisations

Setting the temperature

Turn the TEMPERATURE knob to set the wash temperature (see Programme table on page 18).

The temperature can be lowered, or even set to a cold wash ( ).

Setting the spin speed

Turn the SPIN SPEED knob to set the spin speed for the programme selected.

The maximum spin speeds for each programme are as follows:

Programmes

Maximum spin speed

Cottone

1000 rpm

Synthetics

800 rpm

Wool

800 rpm

Silk

The spin speed can be lowered, or the spin cycle can be excluded altogether by selecting symbol

The washing machine will automatically prevent you from selecting a spin speed higher than the maximum speed for each

programme.

Note. To avoid excessive vibrations, before every spin cycle the machine distributes the load in a uniform manner by conti-

nuously rotating the drum at a speed which is slightly faster than the normal washing speed.

When, despite repeated attempts, the load is still not evenly distributed, the machine spins at a lower speed than the set

frequency.

If the load is excessively unbalanced, the machine attempts to distribute it instead of spinning.

The balancing attempts may extend the total duration of the cycle, up to a maximum of 10 minutes.

Functions

To enable a function:

1. press the button corresponding to the desired function, according to the table below;

2. the function is enabled when the corresponding button is illuminated.

Note: The rapid flashing of the button indicates that the corresponding function cannot be selected for the programme set.

Option

Effect

Delays the start of the

wash by up to 9 hours.

Delay Timer

Bleaching cycle de-

signed to remove the

toughest stains.

Bleaching

This option reduces

the amount of creasing

on fabrics, making

them easier to iron.

Easy iron

Increases the efficiency

of the rinse.

Extra Rinse

Comments

Pess the button repeatedly until the LED corresponding to the

desired delay is turned on. The fifth time the button is pressed, the

function will be disabled.

N.B.: Once you have pressed the Start/Reset button, the delay

can only be decreased if you wish to modify it.

Please remember to pour the bleach into extra compartment 4

(see page 20).

This option is incompatible with the EASY IRON option.

If you set this option, programmes 4, 5, 7,and Delicate Rinse will

be suspended, leaving the laundry to soak (Anti-crease) and icon

will flash:

- to conclude the cycle, press the START/RESET button;

- to run the draining cycle alone, set the knob to the relative

symbol

and press the START/RESET button.

This option is incompatible with the BLEACHING option.

Recommended when the appliance has a full load or with large

quantities of detergent.

Enabled

with pro-

grammes:

All

2, 3, 4, 5,

Rinse

cycles.

3, 4, 5, 7,

8, 9, 10

and Rinse

cycles

1, 2, 3, 4, 5,

8, 9, 10, 12,

13 and Rin-

se cycles.