Indesit BAAN 33 P 사용 설명서 - 페이지 18

{카테고리_이름} Indesit BAAN 33 P에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Indesit BAAN 33 P 48 페이지.

페이지 인쇄

Start-up and use

Starting the appliance

! Before starting the appliance, follow the installation

instructions ( see Installation ).

! Before connecting the appliance, clean the

compartments and accessories well with lukewarm

water and bicarbonate.

! The appliance comes with a motor protection control

system which makes the compressor start approximately

8 minutes after being switched on. The compressor also

starts each time the power supply is cut off whether

voluntarily or involuntarily (blackout).

1. Set the FREEZER OPERATION knob on

2. Insert the plug into the socket and ensure that the

green POWER indicator light illuminates.

3. Turn the REFRIGERATOR OPERATION knob to an

average value. After a few hours you will be able to put

food in the refrigerator.

4. Turn the FREEZER OPERATION knob to an average

value and press the SUPER FREEZE button (rapid

freezing): the SUPER FREEZE indicator light will

illuminate. Once the refrigerator has reached the

optimal temperature, the indicator light goes out and

you can begin food storage.

Chiller system

The appliance comes with one of the chiller systems

described below: take note of your system in order to

determine the most efficient food storage method.

Aircooler

It is recognizable due to the presence of the mechanism

on the top part of the refrigerator compartment ( see

diagram ). The Aircooler maintains a constant fridge

temperature to keep food fresher for longer and will

quickly restore the temperature to the correct level, even

if the door is opened frequently: the blown air (A) is

cooled when it comes into contact with the cold wall,

whereas the hotter air (B) is sucked up ( see diagram ).

The back wall may be covered in frost or droplets of

water, depending on whether the compressor is in

operation or whether it is paused.

Static

Models without the Aýrcooler have the cooling section in

the internal back wall of the compartments. The wall will

be covered in frost or water droplets depending on

whether the compressor is operating or paused: both

cases are normal. If the REFRIGERATOR OPERATION

knob has been set on high values with large quantities of

food and with a high ambient temperature, the appliance

can operate continuously, resulting in excessive frost

formation and excessive energy consumption:

compensate for this by shifting the knob towards lower

values (defrosting will occur automatically).

In static appliances, the air circulates in a natural way:

the colder air tends to move downwards as it is heavier.

The food should be stored as follows:

$UUDQJHPHQW LQVLGH WKH

)RRG

UHIULJHUDWRU

Above the fruit and vegetable

Fresh fish and meat

bins

Above the fruit and vegetable

Fresh cheese

bins

Cooked food

On any shelf

Salami, bread loaf,

On any shelf

chocolate

Fruit and vegetables

In the fruit and vegetable bins

Eggs

On the shelf provided

Butter and margarine On the shelf provided

Bottles, drinks, milk

On the shelf provided

Using the refrigerator to its full potential

• Use the REFRIGERATOR OPERATION knob to adjust

the temperature ( see Description ).

• Press the SUPER COOL button (rapid cooling) to lower

the temperature quickly. For example, when you place

a large number of new food items inside a fridge the

internal temperature will rise slightly. The function

quickly cools the groceries by temporarily reducing

the temperature until it reaches the ideal level.

• Place only cold or lukewarm foods in the compartment,

not hot foods ( see Precautions and tips ).

• Remember that cooked foods do not last longer than

raw foods.

• Do not store liquids in open containers. They will

increase humidity in the refrigerator and cause

condensation to form.