Indesit BAN 40 FNF Series 사용 설명서 - 페이지 7

{카테고리_이름} Indesit BAN 40 FNF Series에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Indesit BAN 40 FNF Series 16 페이지. Refrigerator/freezer combination
Indesit BAN 40 FNF Series에 대해서도 마찬가지입니다: 사용 설명서 (16 페이지)

페이지 인쇄

Start-up and use

Starting the appliance

! Before starting the appliance, follow the installation

instructions (see Installation).

Freezer compartment

ICE CARE tray

The fact that they are situated on the top part of the freezer

drawers ensures greater cleanliness: the ice no longer

comes into contact with the food placed inside the freezer

compartment; furthermore, the dripping of the water during

filling is avoided (a lid to cover up the hole after filling with

water is also provided).

1. Pull out the tray by pushing it up.

Check that the tray is ompletely empty and fill it with water

through the opening provided.

2. Take care not to exceed the level indicated (MAX WATER

LEVEL). Excess water prevents the ice cubes from

dispensing (if this happens, wait for the ice to melt and

empty the tray).

3. Turn the tray 90°: due to the connected compartments each

mould fills with water (see diagram).

4. Close the opening with the lid provided and put the tray

back.

5. When the ice has formed (minimum time approximately 8

hours) knock the tray against a hard surface and wet the

outside so that the ice cubes come loose and take them out

through the opening.

! Before connecting the appliance, clean the compartments

and accessories well with lukewarm water and bicarbonate.

! The appliance comes with a motor protection control system

which makes the compressor start approximately 8 minutes

after being switched on. The compressor also starts each time

the power supply is cut off whether voluntarily or involuntarily

(blackout).

1. Set the FREEZER OPERATION knob on .

2. Insert the plug into the socket and ensure that the green

POWER indicator light illuminates.

3. Turn the FREEZER OPERATION knob to an average value

and press the SUPER FREEZE button (rapid freezing):

the SUPER FREEZE indicator light will illuminate. Once

the refrigerator has reached the optimal temperature, the

indicator light goes out and you can begin food storage.

4. Turn the REFRIGERATOR OPERATION knob to an average

value. After a few hours you will be able to put food in the

refrigerator.

Chiller system

No Frost

The No Frost system circulates cold air continuously to collect

humidity and prevent ice and frost formation. The system

maintains an optimal humidity level in the compartment,

preserving the original quality of the food, preventing the

food from sticking together and making defrosting a thing of

the past. Do not block the aeration cells by placing food or

containers in direct contact with the refrigerating back panel.

Close bottles and wrap food tightly.

Using the refrigerator to its full potential

• Use the REFRIGERATOR OPERATION knob to adjust the

temperature (see Description).

• Press the SUPER COOL button (rapid cooling) to lower

the temperature quickly. For example, when you place a

large number of new food items inside a fridge the internal

temperature will rise slightly. The function quickly cools the

MAX

WATER LEVEL

groceries by temporarily reducing the temperature until it

reaches the ideal level.

• Place only cold or lukewarm foods in the compartment, not

hot foods (see Precautions and tips).

• Remember that cooked foods do not last longer than raw

foods.

• Do not store liquids in open containers. They will increase

humidity in the refrigerator and cause condensation to form.

Food hygiene

1. Once you have bought your food, remove all external

packaging made of paper/cardboard or other wrappers,

which could introduce bacteria or dirt inside your

refrigerator.

2. Protect the food, (especially easily perishable items and

those that have a strong smell), in order to avoid contact

between them, thereby removing both the possibility of

germ/bacteria contamination as well as the diffusion of

strong odours inside the fridge.