Indesit BIAA series 서비스 퀵 매뉴얼 - 페이지 2
{카테고리_이름} Indesit BIAA series에 대한 서비스 퀵 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Indesit BIAA series 2 페이지. Artica entry no frost fridge-freezer platform
Indesit BIAA series에 대해서도 마찬가지입니다: 사용 설명서 (12 페이지), 사용 설명서 (8 페이지), 사용 설명서 (48 페이지), 서비스 퀵 매뉴얼 (2 페이지)
페이지 인쇄
Artica Entry No Frost Fridge-Freezer Platform
Autotest: activation:
Activation:
1
Turn the fridge and freezer knobs to the minimum position (Off).
2
Press the Super Freeze button for approximately 6 seconds.
Deactivation:
1
By switching the appliance on.
2
By unplugging it.
3
After 255 seconds of testing (end of autotest).
Autotest Sequence:
When Autotest is activated, any Last Fault or Non Critical Fault is shown on the display for the fi rst
20 seconds, after which the Autotest sequence begins. In the absence of any fault, the sequence as
described in the table begins.
Step
Duration
1
5 seconds
2
1 second
3
4 seconds
4
125 seconds
5
120 seconds
6
125 seconds
7
120 seconds
8
(*)
Bear in mind that the heating elements are connected in parallel so, in the event only one of them
is interrupted, the Fault will not be displayed
N. B.: The Last Fault is cancelled at the end of the Autotest procedure
2/2
Action
Pause
Probe Check
Pause
FZ Fan ON
Resistenza ON (*)
Damper aperto
FZ Fan ON
Heating element ON (*)
Damper closed
FZ Fan ON
Heating element ON (*)
Damper closed
FZ Fan ON
Heating element ON (*)
Damper closed
Autotest ends
Light
OFF
OFF
If the probes have not failed, skip to step 3
If the probes have failed, skip to step 6
OFF
OFF
OFF
Flashing
Flashing
Notese
Skip to step 8