Indesit SAN 400 매뉴얼 - 페이지 11

{카테고리_이름} Indesit SAN 400에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Indesit SAN 400 48 페이지. Indesit fridge operating instructions
Indesit SAN 400에 대해서도 마찬가지입니다: 사용 설명서 (12 페이지), 사용 설명서 (12 페이지)

페이지 인쇄
Indesit SAN 400 매뉴얼
Stability bracket
(Models SAN400 and SAN400S only):
To prevent the fridge from tilting forwards, it
must be held in place with the stability bracket supplied.
This is the responsibility of the customer.
Fixed to the floor or wall at the rear of the fridge, the
stability bracket hooks onto the compressor mounting
plate holding the fridge secure.
Position the fridge in its chosen location.
Looking from the front of the fridge, mark the position
of the left hand panel.
Move the fridge far enough away to get clear access
to the back wall.
In order to clear components on the compressor
mounting plate, the stability bracket must be
positioned on the floor between 100 - 200mm to the
right of the left hand panel mark.
Mark and drill the fixing holes and insert suitable
fixings to hold the bracket firm.
Carefully re-position the fridge. Make sure that the
compressor mounting plate locates into the stability
bracket.