Indesit ICD 661 UK 서비스 정보 - 페이지 4
{카테고리_이름} Indesit ICD 661 UK에 대한 서비스 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. Indesit ICD 661 UK 28 페이지. Table top
- 1. Table of Contents
- 2. Safety Notes & General Servicing Advice
- 3. Technical Specifications
- 4. Introduction
- 5. Model Identification
- 6. Console
- 7. Preparing the Machine for Use
- 8. Programme Guide
- 9. Water Consumption
- 10. Basic Machine Use
- 11. Components & Functions
- 12. Test Cycle
- 13. Fault Codes & Diagnostics
- 14. Wiring Diagram
- 15. Dismantling Instructions
Indesit
Company
INTRODUCTION
A six place Table Top Dishwasher with 6 wash cycles.
The Programme Selector, buttons and LED indicators are mounted on the console. Any faults are
indicated by beeping and the LEDs flashing quickly on the Console.
There are "Low Warning" LEDs mounted on the Console for Salt and Rinse Aid.
INSTALLATION
Water Connection
The machine should be connected to the water supply with a water pressure between 0.04-1.0MPa.
It is recommended the machine is connected to the cold water supply.
The machine can be connected to the hot water supply providing the temperature is below 60°C, the
cycle will be slightly quicker but wash efficiency may be reduced.
Drain Connection
If inserted into a stand pipe the minimum diameter of the stand pipe should be 4cm.
The maximum height of the drain hose from the base of the machine is 75cm.
Attach drain hose using supplied hose clip.
Max. Hose height 75 cm
Inlet Connection
Outlet Connection
Service Manual UK
English
4 of 28