Indesit LFT 114 UK 서비스 매뉴얼 - 페이지 6

{카테고리_이름} Indesit LFT 114 UK에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Indesit LFT 114 UK 26 페이지. Platform eos. built in

DISCHARGING PIPE CONNECTION

Standhose

Ensure that the flexible discharging-pipe has not been introduced too deep inside the standhose. Should the discharging-pipe be

equipped with "support-flaps", ensure that they too be completely introduced into the standhose.

Above illustration: Recommended height of the standhose 500m (20")

This will prevent the hose from tipping-over during setting-up and use.

Donot place the standhose near to electric-sockets and ENSURE that it is uncoiled and is placed in the direction as shown in the

illstration above.

The standhose must be provided with a hole measuring at least 38mm (1 1/2"). It must be set up as illustrated above, be

provided with a syphon and must discharge into the discharging plumbing system. However, it MUST NOT be connected to the

discharging-hose connections of the water-basin.

FILLING UP BASIN SYSTEM

Regarding discharging plumbing-system under the basin:

Before connecting the flexible discharging-hose, it is recommended to get rid off any internal residuals in the hose which could

give rise to hose blockages.

ILLUSTRATION: Tap-height 600mm min.

Secure discharge-hose using a Jubillee-type clip.

Service Manual

Manual LFT 114 - 116 - 216

Edition

2007.10.15

Language

English