Indesit CIMS 51 K.A IX GB 사용 설명서 - 페이지 3

{카테고리_이름} Indesit CIMS 51 K.A IX GB에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Indesit CIMS 51 K.A IX GB 16 페이지.
Indesit CIMS 51 K.A IX GB에 대해서도 마찬가지입니다: 사용 설명서 (12 페이지), 사용 설명서 (16 페이지)

페이지 인쇄

Installation

! Before placing your new appliance into operation

please read these operating instructions carefully.

They contain important information for safe use, for

installation and for care of the appliance.

! Please keep these operating instructions for future

reference. Pass them on to possible new owners of the

appliance.

Positioning

! Keep packaging material out of the reach of children.

It can become a choking or suffocation hazard. (see

Precautions and tips).

! The appliance must be installed by a qualified person

in compliance with the instructions provided. Incorrect

installation may cause harm to persons, animals or may

damage property.

Fitting the appliance

Use the appropriate cabinet to ensure that the

appliance functions properly.

• The panels adjacent to the oven must be made of

heat-resistant material.

• Cabinets with a veneer exterior must be assembled

with glues which can withstand temperatures of up

to 100°C.

• to install the oven under the counter (see diagram)

and in a kitchen unit, the cabinet must have the

following dimensions:

! The appliance must not come into contact with

electrical parts once it has been installed.

The consumption indications on the data plate have

been calculated for this type of installation.

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

Ventilation

To ensure good ventilation, the back panel of the

cabinet must be removed. It is advisable to install the

oven so that it rests on two strips of wood, or on a

completely flat surface with an opening of at least 45 x

560 mm (see diagrams).

Centring and fastening

Secure the appliance to the cabinet by opening the

oven door and putting 4 screws into the 4 holes of the

outer frame.

! All parts which ensure the safe operation of the

appliance must not be removable without the aid of a

tool.

Electrical connection

! Ovens with a three-pole power supply cable are

designed to operate with alternated current at the

supply frequency and voltage indicated on the data

plate (at the bottom of the oven dashboard). The

earthing conductor of the cable is the yellow-green

conductor.

Two types of connection are provided:

Connection n° 1