Indesit FIMU 23 (WH) 설치 및 사용 설명서 지침 - 페이지 7

{카테고리_이름} Indesit FIMU 23 (WH)에 대한 설치 및 사용 설명서 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Indesit FIMU 23 (WH) 28 페이지. Electric built under double oven
Indesit FIMU 23 (WH)에 대해서도 마찬가지입니다: 설치 및 사용 설명서 지침 (28 페이지)

페이지 인쇄

The electronic

programmer

END OF

COOKING icon

DURATION

icon

DECREASE TIME

button

! The Main Oven (only) can be controlled by the

automatic timer.

! Never operate the grill or top oven when the main

oven is set to cook automatically because the oven

cavity can become warm and this may cause bacterial

growth in food.

Setting the clock

! The clock may be set when the oven is switched off

or when it is switched on, provided that the end time of

a cooking cycle has not been programmed previously.

After the appliance has been connected to the mains,

or after a blackout, the

digits on the DISPLAY will begin to flash.

1. Press the

and the four digits on the display begin to flash.

2. Use the "+" and "-" buttons to adjust the time; if you

press and hold either button, the display will scroll

through the values more quickly, making it quicker and

easier to set the desired value.

3. Wait for 10 seconds or press the

finalise the setting.

Setting the timer

! This function does not interrupt cooking and does not

affect the oven; it is simply used to activate the buzzer

when the set amount of time has elapsed.

1. Press the

and the three digits on the display begin to flash.

2. Use the "+" and "-" buttons to set the desired time;

if you press and hold either button, the display will

scroll through the values more quickly, making it

quicker and easier to set the value.

3. Wait for 10 seconds or press the

finalise the setting.

The display will then show the time as it counts down.

When this period of time has elapsed the buzzer will

be activated.

Downloaded from

www.Manualslib.com

DISPLAY

•• ••

CLOCK icon

TIMER icon

INCREASE TIME

button

SET TIME

button

icon and the four numerical

button several times until the

button again to

button several times until the

button again to

manuals search engine

Programming cooking

! A cooking mode must be selected before

programming can take place.

Programming the cooking duration

1. Press the

button several times until the

and the three digits on the DISPLAY begin to flash.

2. Use the "+" and "-" buttons to set the desired

duration; if you press and hold either button, the

display will scroll through the values more quickly,

making it quicker and easier to set the value.

3. Wait for 10 seconds or press the

finalise the setting.

4. When the set time has elapsed, the text END

appears on the DISPLAY, the oven will stop cooking

and a buzzer sounds. Press any button to stop the

buzzer and turn all control knobs to the 0 position.

•

For example: it is 9:00 a.m. and a time of 1 hour

and 15 minutes is programmed. The programme

will stop automatically at 10:15 a.m.

Setting the end time for a cooking mode

! A cooking duration must be set before the cooking

end time can be scheduled.

1. Follow steps 1 to 3 to set the duration as detailed

above.

2. Next, press the

icon

four digits on the DISPLAY begin to flash.

3. use the "+" and "-" buttons to adjust the cooking

end time; if you press and hold either button, the

display will scroll through the values more quickly,

making it quicker and easier to set the desired value.

4. Wait for 10 seconds or press the

finalise the setting.

5. When the set time has elapsed, the text END

appears on the DISPLAY, the oven will stop cooking

and a buzzer

sounds.Press any button to stop it.

Programming has been set when the

are illuminated. The DISPLAY shows the cooking end

time and the cooking duration alternately.

icon

•

For example: It is 9:00 a.m. and a duration of 1

hour has been programmed. 12:30 is scheduled as

the end time. The programme will start

automatically at 11:30 a.m.

Cancelling a programme

To cancel a programme:

•

press the

the setting you wish to cancel and the digits on the

display are flashing. Press the "-" button until the

digits 00:00 appear on the display.

•

Press and hold the "+" and "-" buttons; this will

cancel all the settings selected previously,

including timer settings.

button again to

button until the

icon and the

button again to

and

button until the icon corresponding to

icon

buttons