Indesit FM 20 K.C IX GB 설치 및 사용 설명서 지침 - 페이지 6

{카테고리_이름} Indesit FM 20 K.C IX GB에 대한 설치 및 사용 설명서 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Indesit FM 20 K.C IX GB 17 페이지. Indesit multifunction oven instructions for installation and use

페이지 인쇄

The programmer makes it possible to preset the oven and

the grill in terms of:

•

delay start with a preset length of time for cooking;

•

immediate start with a preset length of time for cooking;

•

timer.

Button functions:

: Timer with hour and minutes;

: Length of cooking time;

: End cooking time;

: Manual change;

: Change time (backwards);

: Change time (forwards).

How to Reset the Digital Clock

After the appliance has been connected to the power source

or following a power outage, the clock display will begin to

blink and read: 0:00

•

Press the

and

use (within 4 seconds) the

exact time.

Use the

button to move the time forwards.

Use the

button to move the time backwards.

The time can also be changed in the following two ways:

1. Repeat all of the foregoing steps.

2. Press the

button, and then use the

to reset the time.

Manual Operation Mode for the Oven

After the time has been set, the programmer is automati-

cally set to manual mode.

Note: Press the

button to return the oven to manual mode

after every "Automatic" cooking session.

Delayed Start Time with Preset Cooking Length

The length and the end cooking times must be set. Let us

suppose that the display shows 10:00.

1. Turn the oven control knob to the cooking setting and

temperature desired (example: convection oven at

200°C).

2. Press the

and the use (within 4 seconds) the

buttons to set the length of the cooking time. Let us

suppose that 30 minutes was set for the length of the

cooking time. In this case, the display will show:

Release the button, and within 4 seconds, the current time

will reappear with the

symbol and "auto."

3. Press the

button, and then use the

to set the end cooking time. Let us suppose that it is

13:00

4. Release the button and the display will show the current

time within 4 seconds:

Electronic Cooking Programmer

buttons at the same time. Then

and

buttons to set the

and

buttons

and

buttons

When "auto" is lighted, it indicates that the length and end

cooking time have been preset to operate in automatic

mode. At this point, the oven will turn on automatically at

12:30 in order to finish the cooking session within 30

minutes. When the oven is on, the

pot) will appear on the display for the entire length of the

cooking process. The

time to display the setting for the length of the cooking

time, while the

end cooking time.

At the end of the cooking time, an acoustic signal will

sound. Press any button it turn it off (except the

and

buttons).

Immediate Start Time with Preset Cooking Length

When only the length of the cooking time is set (points 1 and

2 of the paragraph entitled, "Delayed Start Time with Preset

Cooking Length"), the cooking session starts immediately.

Cancelling a Preset Cooking Time

Press the

button, and use the

to:

Then press the manual cooking mode button

Timer Feature

The timer can be used to count down from a given length of

time. This feature does not control when the oven comes on

or turns off, but, rather, it only emits an acoustic signal when

the preset time has run out.

Press the button, and the display will read:

Then use the

and

Release the button, and the timer will start at that second.

and

The display will show the current time.

At the end of the preset time, an acoustic signal will sound,

which can be turned off by pressing any button (except the

and

buttons), and the

Changing and Cancelling Settings

•

The settings can be changed at any time by pressing the

corresponding button and using the

•

When the length setting for the cooking time is cancelled,

the end cooking time setting is also cancelled, and vice

versa.

•

When in automatic cooking mode, the appliance will not

accept end cooking times prior to the start cooking time

proposed by the appliance itself.

symbol (cooking

button can be pressed at any

button can be pressed to display the

button to set the time

buttons to set the desired time.

symbol will turn off.

button.