Indesit KIA 641 X 서비스 매뉴얼 - 페이지 16

{카테고리_이름} Indesit KIA 641 X에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Indesit KIA 641 X 19 페이지.

Indesit KIA 641 X 서비스 매뉴얼
CHAPTER 5: DISASSEMBLY
Glass top disassembly:
1 Remove the screws around the hob.
2 Lift up the glass top
Disassembly:
1 Remove connectors UART1 (CN 03) and UART2 (CN 04)
2 Lift it up, paying attention to the springs
Inductor disassembly:
1 Every inductor is fastened with 2 screws.
2 Lift the hob, where inductors are fi xed on.
3 Disconnect the NTC of the Inductor to be removed.
4 Using a screwdriver, detach the wires of the Inductor and remove it.
5 Remove 2 screws fi xing the Inductor to the inner support of the components.
6 Remove the wires.
Fan disassembly:
1 Every inductor is fastened with 2 screws
2 Lift the hob where inductors are fastened to and turn it upside down.
3 Disconnect the mains supply connector of the fan from one of the Power Board
4 Remove 2 screws fastening the fan to the hob
Power board disassembly:
1 Remove the cooktop
2 Lift the hob where the inductors are fastened and turn it upside down.
3 Detach the wires of the Inductors
4 Disconnect the NTC, the Interface wire and the fan (if it is connected to the board interested by the
intervention)
5 Using a small fl at screwdriver, unfasten the heat-sink supports.
6 Remove 2 screws fastening the component.
7 Take out the board.
Service Manual
Induction hob manual
Edition
2008.03.01
16
Language
English