Indesit IDVA 735 사용 설명서 - 페이지 6

{카테고리_이름} Indesit IDVA 735에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Indesit IDVA 735 16 페이지. Tumble dryer
Indesit IDVA 735에 대해서도 마찬가지입니다: 사용 설명서 (20 페이지), 사용 설명서 (21 페이지), 사용 설명서 (20 페이지), 사용 설명서 (20 페이지)

페이지 인쇄

Care and maintenance

Disconnecting the power supply

! Disconnect the dryer when not in use or

during cleaning and maintenance operations.

Cleaning the filter after each cycle

The filter is a fundamental component of the

dryer: its function is to collect lint and fluff that

form during drying.

Clean the filter once drying is completed, by

rinsing it under running water or cleaning it

with a vacuum cleaner. Should the filter be-

come clogged, the flow of air inside the dryer

will be seriously hampered: drying times be-

comes longer and more energy is consumed.

Moreover, the dryer may become damaged.

Checking the drum after each cycle

Rotate the drum manually to remove smaller items (handker-

chiefs) that could have been left inside the dryer.

Cleaning the drum

Avoid using abrasives, steel wool or stainless steel cleaning

agents to clean the drum.

A coloured film may appear on the stainless steel drum

surface: it may be caused by a combination of water and/or

cleaning agents such as fabric conditioners. This coloured

film does not affect the dryer's performance.

Cleaning the tumble dryer

• The external metal and plastic parts and the rubber parts

can be cleaned with the aid of a damp cloth.

• Periodically check the vent hose and all other parts of the

venting system and remove any accumulations of fluff and

lint.

The filter is located

behind of the dryer seal

(see Picture).

Removing the filter:

1. Pull the filter's plastic

handle upwards (see

Picture).

2. Clean the fluff off

the filter and replace it

correctly. Ensure that

the filter is pushed fully

home.

Do not use the dryer unless

the filter has been replaced in

its holder.

Do not use solvents or abrasives.

Have the dryer checked regularly by authorised technical

personnel in order to ensure that the electrical and mechani-

cal parts work safely (see Assistance).