Indesit IS 41 V 지침 책자 - 페이지 6

{카테고리_이름} Indesit IS 41 V에 대한 지침 책자을 온라인으로 검색하거나 PDF를 다운로드하세요. Indesit IS 41 V 48 페이지. Tumble dryer
Indesit IS 41 V에 대해서도 마찬가지입니다: 지침 책자 (4 페이지), 사용 및 관리 및 설치 지침 매뉴얼 (40 페이지)

페이지 인쇄

Maintenance and Care

Switching off the electricity

Unplug your dryer when not using it, when

cleaning it and during all maintenance

operations.

Clean the filter after each cycle

The filter is an important part of your dryer:

it accumulates lint and fluff that is formed

while drying.

When finished drying, clean the filter by

rinsing it under running water or with your

vacuum cleaner. Should the filter become

clogged up, the airflow inside the dryer will

be seriously compromised: drying times

lengthen and you will consume more

energy. It may also damage your dryer.

The filter is found in the door trim (see

diagram).

2. Clean the lint from the inside surface of

the filter.

3. Replace the filter correctly. Ensure the

filter is fully located flush into the door trim.

4. Remove any lint that has built up on the

inside of the door and around the door seal.

! Do not use the dryer without replacing

the filter.

Removing the filter:

1. Pull the plastic

grip of the filter

upwards (see

diagram).

Check the drum after each cycle

Turn the drum manually in order to remove small items

(handkerchiefs) that could have been left behind.

Cleaning the drum

! Do not use abrasives, steel wool or stainless steel

cleaning agents to clean the drum.

A coloured film may start to appear on the stainless

steel drum, this may be caused by a combination of

water and, or cleaning agents such as fabric conditioner

from the wash. This coloured film will not affect the

dryer performance.

Cleaning

External parts in metal or plastic and rubber parts

●

can be cleaned with a damp cloth.

Periodically check the vent tube and any

●

permanent venting fixture to make sure that there

has been no accumulation of fluff or lint, and

remove it.

Remove lint that collects around the filter and the

●

outlet vents.

! Do not use solvents or abrasives.

! Have your dryer checked regularly by authorised

technicians to ensure electrical and mechanical safety

(see Service).