AEG A51700GSW0 사용자 설명서 - 페이지 15

{카테고리_이름} AEG A51700GSW0에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG A51700GSW0 40 페이지.

Rear spacers

In the bag with the documentation, there are two spacers which must be fitted as shown in

the figure.

Fit the spacers into the holes. Make sure

that the arrow (A) is positioned as

shown in the picture.

Turn counter-clockwise the spacers

through 45° until they lock into place.

Levelling

When placing the appliance ensure that it stands

level. This can be achieved by two adjustable feet

at the bottom in front (2). If necessary adjust the

feet by removing the spacer (1).

Location

The appliance should be installed well away from

sources of heat such as radiators, boilers, direct

sunlight etc. Ensure that air can circulate freely

around the back of the cabinet.To ensure best

performance, if the appliance is positioned below

an overhanging wall unit, the minimum distance

between the top of the cabinet and the wall unit

must be at least 100 mm . Ideally, however, the

appliance should not be positioned below over-

hanging wall units. Accurate levelling is ensured

by one or more adjustable feet at the base of the

cabinet. If the cabinet is placed in a corner and

the side with the hinges facing the wall, the dis-

Installation

45˚