A-Neutronics ANI-17015ASUR 사용 설명서 - 페이지 3

{카테고리_이름} A-Neutronics ANI-17015ASUR에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. A-Neutronics ANI-17015ASUR 7 페이지. 9-outlet rack-mountable power conditioner w/ built-in power meter

페이지 인쇄

CONTENTS

INSTALLATION ..............................................................1

FEATURES .................................................................... 2

SPECIFICATIONS ......................................................... 3

OPERATIONS .............................................................. 4

LIMITED WARRANTY .................................................. 5

INSTALLATION

1. This rack mount device can be rack mounted or used as

desktop.

a. It is designed to be installed in a standard 19" equipment

rack and utilizes (1) rack unit (1RU) of space.

b. Optional: remove (4) bottom feet. Secure unit to rack using

the (4) slots and (4) screws (not provided)

2. Plug AC power cable into a properly grounded NEMA 5-15R

receptacle.

3. Plug equipment into receptacles on back of ANI-17015ASUR

4. Press On/Off switch on front of device to the "On" position.

5. Provides protection for up to (9) circuits.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or

operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of fire,

electrical shock and injury to persons.

• To prevent fire or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts

inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the

PSU if it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufficient space for air to circulate around the unit.

DISCLAIMERS

The information in this manual has been carefully checked and

is believed to be accurate. We assume no responsibility for any

infringements of patents or other rights of third parties which

may result from its use.

We assume no responsibility for any inaccuracies that may be

contained in this document. We make no commitment to update

or to keep current the information contained in this document.

We reserve the right to make improvements to this document

and/or product at any time and without notice.

No part of this document may be reproduced, transmitted,

transcribed, stored in a retrieval system, or any of its part translated

into any language or computer file, in any form or by any means

- electronic, mechanical, magnetic, optical, chemical, manual,

or otherwise - without express written permission and consent

Version 1.2 JAN 2015

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may

be trademarks of the companies with which they are associated.

A-Neutronics ANI-17015ASUR 사용 설명서 - 페이지 3

TABLE OF CONTENTS

INSTALLATION