AEG A75298-SK1 사용자 설명서 - 페이지 5

{카테고리_이름} AEG A75298-SK1에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG A75298-SK1 48 페이지.

Service

• Any electrical work required to do the servicing of the appliance should be carried out

by a qualified electrician or competent person.

• This product must be serviced by an authorized Service Centre, and only genuine spare

parts must be used.

Environment Protection

This appliance does not contain gasses which could damage the ozone layer, in either its

refrigerant circuit or insulation materials. The appliance shall not be discarded together

with the urban refuse and rubbish. The insulation foam contains flammable gases: the

appliance shall be disposed according to the applicable regulations to obtain from your

local authorities. Avoid damaging the cooling unit, especially at the rear near the heat

exchanger. The materials used on this appliance marked by the symbol

1. ON/OFF button

2. Temperature regulator (for warmer temperatures)

3. Temperature indicator

4. Temperature regulator (for colder temperatures)

5. FROSTMATIC light

6. FROSTMATIC button

7. Alarm light

8. Alarm reset button

Insert the plug into the wall socket.

If the pilot light and the display is not illuminated, press ON/OFF button.

Select a temperature according to "Temperature regulation".

If the door remains open for some minutes, the light will turn off automatically. The light

is reset by closing and opening the door.

Press the ON/OFF button until a countdown is completed from -3 -2 -1.

The temperature indicator and the Pilot light switches off.

3) If a water connection is foreseen

Control panel

are recyclable.