AEG A92860GNX0 사용자 설명서 - 페이지 12

{카테고리_이름} AEG A92860GNX0에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG A92860GNX0 24 페이지. Aeg freezer user manual
AEG A92860GNX0에 대해서도 마찬가지입니다: 사용자 설명서 (28 페이지), 사용자 설명서 (24 페이지)

페이지 인쇄

Care and cleaning

• do not allow fresh, unfrozen food to touch food which is already frozen, thus avoiding a

rise in temperature of the latter;

• lean foods store better and longer than fatty ones; salt reduces the storage life of food;

• water ices, if consumed immediately after removal from the freezer compartment, can

possibly cause the skin to be freeze burnt;

• it is advisable to show the freezing in date on each individual pack to enable you to keep

tab of the storage time.

Hints for storage of frozen food

To obtain the best performance from this appliance, you should:

• make sure that the commercially frozen foodstuffs were adequately stored by the retail-

er;

• be sure that frozen foodstuffs are transferred from the foodstore to the freezer in the

shortest possible time;

• not open the door frequently or leave it open longer than absolutely necessary.

• Once defrosted, food deteriorates rapidly and cannot be refrozen.

• Do not exceed the storage period indicated by the food manufacturer.

CARE AND CLEANING

CAUTION!

Unplug the appliance before carrying out any maintenance operation.

This appliance contains hydrocarbons in its cooling unit; maintenance and recharging must

therefore only be carried out by authorized technicians.

Periodic cleaning

The equipment has to be cleaned regularly:

• clean the inside and accessories with lukewarm water and some neutral soap.

• regularly check the door seals and wipe clean to ensure they are clean and free from

debris.

• rinse and dry thoroughly.

Do not pull, move or damage any pipes and/or cables inside the cabinet.

Never use detergents, abrasive powders, highly perfumed cleaning products or wax polishes

to clean the interior as this will damage the surface and leave a strong odour.

Clean the condenser (black grill) and the compressor at the back of the appliance with a

brush. This operation will improve the performance of the appliance and save energy con-

sumption.

Take care of not to damage the cooling system.

When moving the cabinet, lift it by the front edge to avoid scratching the floor.