AEG AGN71200F0 사용자 설명서 - 페이지 12
{카테고리_이름} AEG AGN71200F0에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG AGN71200F0 16 페이지.
AEG AGN71200F0에 대해서도 마찬가지입니다: 사용자 설명서 (20 페이지)
페이지 인쇄
12 www.aeg.com
A
E
The wires in the mains lead are
coloured in accordance with the
following code:
A Green and Yellow:
C Brown:
E Blue:
As the colours of the wires in the mains
lead of this appliance may not corre-
spond with the coloured markings iden-
tifying the terminals in your plug, pro-
ceed as follows:
8.3 Ventilation requirements
5 cm
B
C
D
Earth
Live
Neutral
min.
200 cm
2
min.
200 cm
1.
Connect the wire coloured green
and yellow to the terminal marked
either with the letter "E" or by the
earth symbol
and yellow.
2.
Connect the wire coloured blue to
the terminal either marked with the
letter "N" or coloured black.
3.
Connect the wire coloured brown to
the terminal either marked with the
"L" or coloured red.
4.
Check that no cut, or stray strands of
wire is present and the cord clamp D
is secure over the outer sheath.
5.
Make sure the electricity supply volt-
age is the same as that indicated on
the appliance rating plate.
6.
Switch on the appliance.
The appliance is supplied with a 13 amp
plug fitted B. In the event of having to
change the fuse in the plug supplied, a
13 amp ASTA approved (BS 1362) fuse
must be used.
WARNING!
A cut off plug inserted into a 13
amp socket is a serious safety
(shock) hazard. Ensure that it is
disposed of safely.
The airflow behind the appliance must
be sufficient.
2
or coloured green