AEG ARCTIS 사용 설명서 - 페이지 5

{카테고리_이름} AEG ARCTIS에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG ARCTIS 36 페이지. Built-in fridge-freezers
AEG ARCTIS에 대해서도 마찬가지입니다: 사용 설명서 (32 페이지), 사용 설명서 (28 페이지), 사용 설명서 (40 페이지), 사용 설명서 (28 페이지), 작동 지침 (16 페이지), 사용 설명서 (36 페이지), 사용 설명서 (26 페이지), 사용 설명서 및 설치 매뉴얼 (28 페이지), 사용 설명서 (36 페이지), 사용 설명서 (27 페이지), 사용 설명서 (34 페이지), 사용자 설명서 (24 페이지), 설치 지침 매뉴얼 (11 페이지), 사용 설명서 (29 페이지), 사용 설명서 (23 페이지), 설치 지침 매뉴얼 (25 페이지), 설치 지침 매뉴얼 (24 페이지)

Important Safety Instructions

These warnings are provided in the interests of your safety. Ensure

that you understand them all before installing or using this appli-

ance. Your safety is of paramount importance. If you are unsure

about any of the meanings of these warnings contact the Customer

Care Department.

Prior to Installation

• Check the freezer for transport damage. Under no circumstances

should a damaged appliance be installed! In the event of damage,

please contact your retailer.

Installation

• This appliance is heavy. Care should be taken when moving it.

• It is dangerous to alter the specifications or attempt to modify this

product in any way.

• Ensure that the appliance does not stand on the electrical supply

cable. If the supply cable is damaged, it must be replaced by a cable

available from your local Service Force Centre.

• Any electrical work required to install this appliance should be carried

out by a qualified electrician or competent person.

• Parts which heat up should not be exposed. Whenever possible, the

back of the appliance should be close to a wall, but leaving the

required distance for ventilation, as stated in the installation instruc-

tions.

• The appliance should be left for 2 hours after installation before it is

turned on, in order to allow the refrigerant to settle.

Refrigerant

The refrigerant isobutane (R600a) is contained within the refrigerant

circuit of the appliance, a natural gas with a high level of environmen-

tal compatibility, which is nevertheless flammable.

• During transportation and installation of the appliance, be certain

that none of the components of the refrigerant circuit become dam-

aged.

• If the refrigerant circuit should become damaged:

– avoid open flames and sources of ignition;

– thoroughly ventilate the room in which the appliance is situated.

818 22 13-00/2