A-Neuvideo ANI-62HDRH 사용 설명서 - 페이지 15

{카테고리_이름} A-Neuvideo ANI-62HDRH에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. A-Neuvideo ANI-62HDRH 20 페이지. 4k uhd+ hdr 6x2 hdmi matrix w/audio de-embedding

NEUVIDEO

• Matrix Control: This tab provides direct control over the unit's power state, input/ output routing, and EDID management. A way

to reboot the unit, or perform a factory reset is also provided.

Any of the available inputs may be selected as a source for either of the two outputs by

selecting the preferred input from the dropdown next to the "Output A" and "Output B"

text.

It is also possible to select a single source to be routed to both outputs quickly by selecting

a source from the "Output All From" dropdown. Selecting "Masked" will output a blank

video signal with no audio.

The EDID section of the Matrix Control tab controls the EDID management for the unit.

All inputs can share the same assigned EDID, or each input can have a discrete EDID

assigned to it.

NOTE: Changes to the EDID selection will result in a brief blanking of the video signal.

• Selecting the "ALL" mode will send the selected EDID to all inputs.

• Selecting the "APPOINT" mode allows each input to have a different EDID assigned to it.

The available EDID options are:

• OUTPUT A: EDID is passed from the currently connected display

• OUTPUT B: EDID is passed from the currently connected display

• FHD/2Ch: 1080p@60Hz, 8-bit & LPCM 2.0

• FHD/MCh: 1080p@60Hz, 8-bit & LPCM 7.1/Bitstream/HD Bitstream

• 4K UHD/2Ch: 4K@30Hz, 8-bit & LPCM 2.0

• 4K UHD/MCh: 4K@30Hz, 8-bit & LPCM 7.1/Bitstream/HD Bitstream

• 4K UHD+/2Ch: 4K@60Hz (4:4:4), 8-bit & LPCM 2.0

• 4K UHD+/Mch: 4K@60Hz (4:4:4), 8-bit & LPCM 7.1/Bitstream/HD Bitstream

The unit can also be powered on or off from this tab. Note that Ethernet, RS-232, and IR

will remain active while the unit is in "OFF" (stand-by) mode. To perform a factory reset

on the unit, please click the "Factory Reset" button. To reboot the unit, please click the

"Reboot" button.

WebGUI Control