AEG SANTO 75428 DT 사용자 설명서 - 페이지 8
{카테고리_이름} AEG SANTO 75428 DT에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG SANTO 75428 DT 46 페이지.
페이지 인쇄
Fitting the Door Handles
1.
Screw the top handle
bracket to the handle rod
(1). Fit the bottom handle
bracket on the lower left-
hand side of the door (2).
2.
Fit the top handle bracket
on the top left-hand side
of the door (3) and screw
the handle rod to the
bottom handle bracket (4).
Attention!
Do not over tighten the
screws (max. 2 Nm) as you
may damage the door
handles.
Rehingeing the door
The side at which the door opens can be changed from the right side
(factory adjustment) to the left side, if the installation site requires.
Warning! When changing the side at which the door opens, the appliance
may not be connected to the mains. Remove plug from the mains
beforehand.
8