AEG SANTO C 8 18 43-4I 작동 및 설치 지침 - 페이지 11

{카테고리_이름} AEG SANTO C 8 18 43-4I에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG SANTO C 8 18 43-4I 28 페이지. Integrated fridge freezer
AEG SANTO C 8 18 43-4I에 대해서도 마찬가지입니다: 작동 및 설치 지침 (13 페이지), 작동 및 설치 지침 (28 페이지), 작동 및 설치 지침 (24 페이지)

페이지 인쇄
AEG SANTO C 8 18 43-4I 작동 및 설치 지침
Temperature display
The temperature display can indicate several pieces of information.
•
During normal operation, the temperature currently present in the freezer
(ACTUAL temperature) is displayed.
•
When the temperature is being adjusted a flashing display indicates the
freezer temperature currently set (DESIRED temperature).
Starting Up - Setting the Temperature
1.
Plug the mains plug into the mains socket.
2.
Press ON/OFF button. The green mains pilot indicator illuminates. The alarm
light flashes since the temperature is reached. The buzzer sounds.
3.
Pressing button "P" the buzzer stops.
4.
Press either the "J" or "L" button. The temperature display switches over and
the DESIRED temperature currently set flashes on the temperature display.
5.
Set the required temperature by pressing the "J" or "L" buttons (see section
"Temperature setting buttons"). The temperature display will immediately
show the changed setting. Each time the button is pressed the temperatu-
re is adjusted by 1 °C.
From a food safety point of view -18 °C should be considered sufficiently
cold for storing food in the freezer.
6.
The alarm light,when the set temperature is reached. Press the alarm but-
ton to turn off the buzzer.
FROSTMATIC
The FROSTMATIC function accelerates the freezing of fresh food and, at the
same time, protects foodstuffs already stored from undesirable warming.
1.
The FROSTMATIC function is switched on by pressing the FROSTMATIC but-
ton. The yellow light illuminates.
If the FROSTMATIC function is not ended manually, the appliance switch off
the FROSTMATIC function after 48 hours. The yellow light goes out.
2.
The FROSTMATIC function can be ended manually at any time by pressing
the FROSTMATIC button again. The yellow light goes out.

Alarm reset button

In the event of an abnormal temperature rise inside the freezer (e.g. power
cut) warning light (O) will start to flash and a buzzer will sound.
After the temperature has returned to normal, the warning light (O) will
continue to flash, although the buzzer has stopped.
When the alarm button is pressed, the warmest temperature reached in the
compartment flashes on the indicator.
11