AEG SCE81925TS 사용자 설명서 - 페이지 16

{카테고리_이름} AEG SCE81925TS에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG SCE81925TS 20 페이지.
AEG SCE81925TS에 대해서도 마찬가지입니다: 사용자 설명서 (40 페이지)

페이지 인쇄

www.aeg.com

Problem

The compressor does not

start immediately after

pressing the "FROSTMAT-

IC" or "COOLMATIC", or af-

ter changing the tempera-

ture.

Water flows inside the refrig-

erator.

Water flows on the floor.

Temperature cannot be set.

dEMo appears on the dis-

play.

The temperature in the ap-

pliance is too low/too high.

Possible cause

This is normal, no error has

occurred.

Food products prevent the

water to flow into the wa-

ter collector.

The water outlet is clog-

ged.

The melting water outlet is

not connected to the

evaporative tray above the

compressor.

The "FROSTMATIC func-

tion" or "COOLMATIC

function" is switched on.

The appliance is in demon-

stration mode.

The temperature regulator

is not set correctly.

The door is not closed cor-

rectly.

The food products' tem-

perature is too high.

Many food products are

stored at the same time.

The door has been

opened often.

The "FROSTMATIC func-

tion" or "COOLMATIC

function" is switched on.

Solution

The compressor starts after a

period of time.

Make sure that food products

do not touch the rear plate.

Clean the water outlet.

Attach the melting water out-

let to the evaporative tray.

Switch off "FROSTMATIC

function" or "COOLMATIC

function" manually, or wait un-

til the function resets automat-

ically to set the temperature.

Refer to "FROSTMATIC func-

tion" or "COOLMATIC func-

tion".

Keep the OK pressed for ap-

proximately 10 seconds until a

long sound is heard and dis-

play shuts off for a short time.

Set a higher/lower tempera-

ture.

Refer to "Closing the door".

Let the food products temper-

ature decrease to room tem-

perature before storage.

Store less food products at the

same time.

Open the door only if necessa-

ry.

Refer to "FROSTMATIC func-

tion" or "COOLMATIC func-

tion".