AEG SKB612F1AF 사용자 설명서 - 페이지 14

{카테고리_이름} AEG SKB612F1AF에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG SKB612F1AF 32 페이지.
AEG SKB612F1AF에 대해서도 마찬가지입니다: 설치 지침 (12 페이지)

페이지 인쇄

www.aeg.com

Problem

Water flows inside the refrig‐

erator.

Water flows on the floor.

Temperature cannot be set.

The temperature in the appli‐

ance is too low/too high.

Temperature setting LEDs

flash at the same time.

Possible cause

Stored food was not wrap‐

ped.

Food products prevent the

water from flowing into the

water collector.

The water outlet is clogged.

The melting water outlet is

not connected to the evapo‐

rative tray above the com‐

pressor.

The "Coolmatic function" is

switched on.

The temperature is not set

correctly.

The door is not closed cor‐

rectly.

The food products' tempera‐

ture is too high.

Many food products are stor‐

ed at the same time.

The door has been opened

often.

The Coolmatic function is

switched on.

There is no cold air circula‐

tion in the appliance.

An error has occurred in

measuring the temperature.

Solution

Wrap food in suitable pack‐

aging before storing it in the

appliance.

Make sure that food prod‐

ucts do not touch the rear

plate.

Clean the water outlet.

Attach the melting water out‐

let to the evaporative tray.

Switch off "Coolmatic func‐

tion" manually, or wait until

the function deactivates au‐

tomatically to set the temper‐

ature. Refer to "Coolmatic

function" section.

Set a higher/lower tempera‐

ture.

Refer to "Closing the door"

section.

Let the food products tem‐

perature decrease to room

temperature before storage.

Store less food products at

the same time.

Open the door only if neces‐

sary.

Refer to "Coolmatic function"

section.

Make sure that there is cold

air circulation in the appli‐

ance. Refer to "Hints and

Tips" chapter.

Contact the nearest Author‐

ised Service Centre. The

cooling system will continue

to keep food products cold,

but temperature adjustment

will not be possible.