AEG 2020 D 작동 및 설치 지침 - 페이지 18

{카테고리_이름} AEG 2020 D에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG 2020 D 21 페이지. Cooker hood
AEG 2020 D에 대해서도 마찬가지입니다: 작동 및 설치 지침 (20 페이지)

Final fixing and adjustment of the

hood:

Two adjustable connectors are provided at the rear of

the hood.

(a)

Turn the screws (V1), until the screws (V2) align

with the screw holes (F2).

(b)

Adjust the vertical and horizontal alignment using

screws (V2).

(c)

Turn the screw (V1) to secure the hood to the

wall.

(d)

Insert the plastic grommets provided into the

screw holes (F2).

(e)

Tighten the screws fixing the canopy (C) to the

chimney (A).

Ducting and recirculation fitting:

Ducting

When ducting to the outside the charcoal filter is

not required and must be removed and destroyed.

When ducting from the rear outlet using 125mm

round ducting it will be necessary to fit the 120-

125mm ducting collar onto the spigot (F) before

connecting the ducting, to ensure an air tight fit.

This appliance must not be connected to ducting

with a smaller diameter than 120mm.

When ducted from the left or right hand side, it

will be necessary to fit the 60x204mm adapter

(W) for use with flat channel ducting to the spigot

(R).

Recirculation

The hood is supplied in the recirculation mode,

with the charcoal filter and the recirculation grille

(G) fitted (over the outlet in the top of the fan

assembly) ready for use.

The charcoal filter will have to be removed during

installation to allow for electrical connection.

INSTALLING INSTRUCTIONS