AEG 2060 D 운영 및 설치 매뉴얼 - 페이지 5

{카테고리_이름} AEG 2060 D에 대한 운영 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG 2060 D 19 페이지. Electrolux cooker hood operating and installation instructions 2060 d
AEG 2060 D에 대해서도 마찬가지입니다: 작동 및 설치 지침 (20 페이지), 운영 및 설치 매뉴얼 (19 페이지)

페이지 인쇄

Introduction

Extractor version

• The hood is supplied as an extractor unit and can also be used with

a filtering function by fitting one activated carbon filter (special

accessory).

• You will need original AEG carbon filter for this function (see Special

Accessories).

• The air is discharged to the outside through a pipe, which must be

fitted to connection flange A. Fig. 1.

• In order to obtain the best performance the hose should have a

diameter equal to the outlet hole.

Should there already be a pipe of diameter 125 mm that ducts to

the outside through the walls or roof, it is possible to use the 150/

125 mm reduction flange provided. In this case the hood will be

slightly more noisy.

Filter Version

• The air is filtered through an activated charcoal filter and returned to

the kitchen through the top grill of the outlet pipe.

• You will need an original AEG KF8 activated carbon filter for the

filtering function. (See Special Accessories).

• Fix the deflector using 2 screws Ø 2,9 x 13 mm. Fig. 2.

• Optionally, the position of the chimney elements can be changed.

When using the hood in the filter version the chimney must be fixed

at the top, with the air outlet grill at the side.

Fig. 1

Fig. 2