AEG 240 D 작동 및 설치 지침 - 페이지 18

{카테고리_이름} AEG 240 D에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG 240 D 22 페이지.

• Open the latch L and swing the grille

downwards. (Fig. 12).

• To remove the grid, pull it forwards

from the right and release it.

• Remove the stops M to take out the

filter. (Fig. 15).

• Clean the inner housing using a hot

detergent solution only (never use

caustic detergents, abrasive

powders or brushes).

• Hand washing

Soak grease filters for about one

hour in hot water with a grease-

loosening cleaner, then rinse off

thoroughly with hot water. Repeat the process if necessary. Refit the

grease filters when they are dry.

Dishwasher machine

Place grease filters in dish washer. Select most powerful washing

programme and highest temperature, at least 65°C. Repeat the

process.

When washing the metal grease filter in the dishwasher a slight

discoloration of the filter can occur.

• Wait until the filters are completely dry, then replace them in their

original positions, taking care that there are no gaps between the

two filters.

• Screw the fuses back in or reset the automatic circuit breaker.

• Select any fan speed using the E

the B

and F

down for at least 3 seconds until the flashing letter F stops being

shown on the display (D) and then press the button B

The activated carbon filter display is now ready for use again.

buttons at the same time, continuing to hold them

or F

buttons and then press