AEG 240 D 작동 및 설치 지침 - 페이지 4

{카테고리_이름} AEG 240 D에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG 240 D 22 페이지.

Introduction

• The hood is supplied as an extractor unit and can also be used with

a filtering function by fitting one activated carbon filter (special

accessory).

• The unit features two outlet holes, one of which A is located on the

top of the unit while the other B is located on the rear.

• To connect up the hose, you should first fit the bayonet-mounting

flange C (Ø 120 mm) on the outlet required (if using the top outlet,

fix the flange in place using the screw supplied as shown in Fig. 1).

Close off the unused hole using the bayonet fitting caps D.

• Important! To use the back hole B, remove switch F from the top

hole. See Fig 2.