AEG 2460 D 작동 및 설치 지침 - 페이지 6

{카테고리_이름} AEG 2460 D에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG 2460 D 20 페이지. Electrolux cooker hood operating and installation instructions 2460 d
AEG 2460 D에 대해서도 마찬가지입니다: 작동 및 설치 지침 (18 페이지)

페이지 인쇄

Description of the Appliance

• The hood is supplied as an extractor unit and can also be used with

a filtering function by fitting one charcoal filter

• You will need an original AEG charcoal filter for this function

(Available from your local AEG Service Force Centre).

Extractor version

• The air is discharged to the outside through a hose, which must be

fitted to connection flange A. Fig. 1.

• In order to obtain the best performance

the hose should have a diameter equal

to the outlet hole.

Should there already be a pipe of

diameter 125 mm that ducts to the

outside through the walls or roof, it is

possible to use the 150/125 mm

reduction flange provided. In this case

the hood will be slightly more noisy.

Filter Version

• The air is filtered through a charcoal filter and returned to the kitchen

through the top grill of the outlet pipe.

• You will need an original AEG charcoal filter for the filtering function.

• Fix the deflector using 4 screws Ø 3,5x6.5 mm. Fig. 2.

• Optionally, the position of the chimney elements can be changed.

When using the hood in the filter version the chimney must be fixed

at the top, with the air outlet grill at the side.

Fig. 2

Fig. 1