AEG 3010 D 작동 및 설치 지침 - 페이지 14

{카테고리_이름} AEG 3010 D에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG 3010 D 17 페이지. Aeg cooktop user manual
AEG 3010 D에 대해서도 마찬가지입니다: 운영 및 설치 매뉴얼 (19 페이지)

페이지 인쇄

Electrical connection

Safety warnings for the electrician

Before connecting the appliance to the power supply, check that the

voltage indicated on the rating plate corresponds to the mains power

supply available. Appliances fitted with a plug can be connected to any

standard power socket within easy access.

Should it be necessary to provide a fixed connection, the hood must only

be installed by an electrician authorised by the local electricity board.

When installing, an omnipolar disconnector with a distance of at least 3

mm between contacts must be provided.

This disconnector may be for example a switch, fuses (plug fuses must

be removed from the fuse box, fault current switches and remote switches

with a distance of over 3 mm between contacts.

The manufacture declines all responsibility for malfunctions resulting from

failure to comply with the above instructions.

If the power socket is applied directly above the hood this gives two

advantages:

1. the socket is not visible.

2. the appliance can be disconnected at need merely be removing the

plug.

Electrical connection

220-240 V – by means of fixed power cable with plug.

(Fixed connection of the appliance must only be carried out by an au-

thorised electrician.)