AEG 341 D 운영 및 설치 매뉴얼 - 페이지 8

{카테고리_이름} AEG 341 D에 대한 운영 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG 341 D 21 페이지.

Maintenance and Care

• The hood must always be disconnected from the electricity

supply before beginning any maintenance work.

• The purpose of the grease filters is to absorb grease particles which

form during cooking and it must always be used, either in the

external evacuation or internal recycling function.

The paper grease filter is very thin (approx. 1 mm) and positioned

on the inside of its related support grille.

The filter should be changed once a month.

• The grille should be cleaned with luke warm water and non-abrasive

detergent when you change the filter.

• The grease filter can be ordered from your local Service Force

Centre.

Opening the grille

Open the latch and remove the grille downwards. Fig. 3

Removing the filter

Remove the stops to take out the filter. Fig. 3

• Clean the inner housing using a hand hot solution only(never use

caustic detergents, abrasive powders or brushes).

Fig. 3