AEG 740 D 작동 및 설치 지침 - 페이지 8

{카테고리_이름} AEG 740 D에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG 740 D 16 페이지.

Carbon filter

• The activated carbon filter should only be used if you want to use the

hood in its filtering function.

• To do this you will need an original AEG activated carbon filter (see

special accessories).

• Cleaning/replacing the carbon filter

The activated carbon filter must normally be replaced at least once

every 6 months. This filter cannot be washed or regenerated. To

guarantee proper absorption of odours the working volume of the

activated carbon must be proportionate to the hood air flow. In this

case the high quality of the activated carbon will ensure efficient

odour removal for approximately one year, assuming that the hood is

used normally. For this reason you should always use original AEG

filters only, making sure they are replaced when necessary.

• Mounting

Pull out the drawer.

Remove the grease filters, open the lamp cover support.

Fit the activated carbon filter so that it covers the grilles protecting

the hood motor and fan.

Turn the carbon filter handle in a clockwise direction.

Repeat the above operations for the second activated carbon filter.

Replace the grease filters and the lamp cover support.

• To dismount proceed in reverse order.

• Always specify the hood model code number and serial number

when ordering replacement filters. This information is shown on the

registration plate located on the inside of the unit.

• The activated carbon filter can be ordered from the AEG technical

assistance service.

Fig. 5