AEG 8160 D 작동 및 설치 지침 - 페이지 15

{카테고리_이름} AEG 8160 D에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG 8160 D 20 페이지. Cooker hood
AEG 8160 D에 대해서도 마찬가지입니다: 작동 및 설치 지침 (16 페이지), 작동 및 설치 지침 (18 페이지), 운영 및 설치 매뉴얼 (16 페이지)

페이지 인쇄

Wall unit mounting - Fig. 7

• Position the template on the wall (1) and mark the position, and drill

(2) the holes (2 x Ø 8 mm).

• Mount the two wall plugs with the hooks (3).

• Hang the hood on the hooks and level it with the adjustment screws

(4).

• Remove the grease filters (5) and mark for the two screws (6).

Remove the hood and drill the holes (2 x Ø 8 mm).

Insert the rawl plugs (7) and hang the hood on the wall again. Adjust

it with the screws (8) and secure it with the screws (9).

• Mount the chimney support (10) with the wall plugs (9) and the

screws (11). Be careful that it is centered over the hood and

horizontally aligned.

• Extractor version (S): Connect a tube between the hood air outlet

and the wall or roof exhaust channel. Fix it with the tube clamps

supplied.

Filter version (K): Mount the deflector with the two screws supplied

(2,9x13 mm) (13).

• Make the electrical connection (14) (see previous page)

• Place the chimney (15) and fix it to the top chimney support with the

two screws (16) supplied (2,9x6,5 mm). Lower the bottom part of

the chimney (17) and fasten it to the top of the hood with two

screws, supplied (18) (2,9x6,5 mm).