AEG 835 D 설치 및 운영 지침 매뉴얼 - 페이지 15

{카테고리_이름} AEG 835 D에 대한 설치 및 운영 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG 835 D 18 페이지. Fume extractor hood

Carbon filter

The activated carbon filter should only be used if you

want to use the hood in its filtering function.

To do this you will need an original AEG activated carbon

filter (see special accessories).

This filter cannot be cleaned or reused.

As a general rule, the activated carbon filter should

be changed once every four months.

Mounting — Fig. 5

Fit one carbon filter on the left and one on the right so to

cover the plastic grids that protect the fan wheel, then

turn clockwise the central handle of the carbon filter.

Fig. 5

To dismount proceed in reverse order.

Always specify the hood model code number and serial

number when ordering replacement filters. This

information is shown on the registration plate located on

the inside of the unit.

The activated carbon filter can be ordered from the AEG

technical assistance service.