AEG 8391 D 작동 및 설치 지침 - 페이지 5

{카테고리_이름} AEG 8391 D에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG 8391 D 20 페이지. Cooker hood
AEG 8391 D에 대해서도 마찬가지입니다: 운영 및 설치 매뉴얼 (16 페이지)

Description of the Appliance

• The hood is supplied as an extractor unit and

can also be used with a filtering function

by fitting one charcoal filter.

• You will need an original AEG charcoal

filter for this function (Available from your

local AEG Service Force Centre).

• In this version fumes are extracted to the

outside via a hose connected to the

coupling ring A. Fig. 1.

• In order to obtain the best performance

the hose should have a diameter equal

to the outlet hole.

• Should there already be a pipe of diameter 125 mm that ducts to

the outside through the walls or roof, it is possible to use the 150/

125 mm reduction flange provided. In this case the hood will be

slightly noisier.

• The air is filtered through an charcoal filter and returned to the

kitchen through the top grill of the outlet pipe.

• You will need an original AEG charcoal filter for the filtering function.

(See Special Accessories).

• Fix the deflector using 2 screws Ø 2,9x13 mm. Fig. 2.

• Optionally, the position of the chimney

elements can be changed.

When using the hood in the filter

version the chimney must be fixed at

the top, with the air outlet grill at the

side.

Fig. 1

Fig. 2