AEG CHDE 3160 작동 및 설치 지침 - 페이지 8

{카테고리_이름} AEG CHDE 3160에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG CHDE 3160 19 페이지. Cooker hood
AEG CHDE 3160에 대해서도 마찬가지입니다: 작동 및 설치 지침 (20 페이지), 운영 및 설치 매뉴얼 (20 페이지), 사용 설명서 (20 페이지), 작동 및 설치 지침 (19 페이지)

페이지 인쇄

Maintenance and care

• The hood must always be disconnected from the electricity

supply before beginning any maintenance work.

• Never insert pointed objects in the motor's protective grid.

• Wash the outside surfaces using a delicate detergent solution. Never

use caustic detergents or abrasive brushes or powders.

• Only ever clean the switch panel and filter grille using a damp cloth

and delicate detergents.

• It is extremely important to clean the unit and change the filters at

the recommended intervals. Failure to do so will cause grease

deposits to build up that could constitute a fire hazard.

Grease Filter

• The purpose of the grease filters is to absorb grease particles which

form during cooking and it must always be used, either in the

external evacuation or internal recycling function.

The synthetic filter is very thin (approx. 1 mm) and positioned on the

inside of its related support grille.

The filter should be changed once a month.

• The grille should be cleaned with luke warm water and non-abrasive

detergent when you change the filter.

• The grease filter can be ordered from your local ELECTROLUX

Service Force Centre.

Opening the grid

• Move the two sliders towards the centre (in the "OPEN" direction)

and release the grille downwards. Fig. 6.

To refit the grid: it should be inserted above between the

appropriate guides until it latches into place, and after having

propped the grille to the cooker hood also in the lower part move the

two sliders outwards (in the "CLOSED" direction).

Removing the filter

Remove the stops to take out the filter. Fig. 6.

• Clean the inner housing using a hot detergent solution only (never

use caustic detergents, abrasive powders or brushes).

Guides

Fig. 6

Taquets