AEG CHDE 3160 운영 및 설치 매뉴얼 - 페이지 18

{카테고리_이름} AEG CHDE 3160에 대한 운영 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG CHDE 3160 20 페이지. Cooker hood
AEG CHDE 3160에 대해서도 마찬가지입니다: 작동 및 설치 지침 (19 페이지), 작동 및 설치 지침 (20 페이지), 사용 설명서 (20 페이지), 작동 및 설치 지침 (19 페이지)

페이지 인쇄

• Fix the base spacer M to the wall with the two screws R 5x45

provided using either the long or the short arm, depending on the

depht of the side cupboards. Do not tighten the screws fully. Fig. 11.

• Fix the hood to the wall by means of the two hooks P

previously mounted, but first move the upper brackets S so

that the front panel of the hood, once mounted, will be in line

with the front edge of the cupboard doors. The two upper

brackets S, located at the top rear edge of the hood may be

slid backwards and forwards by loosening its fixing screws T

adjacent to them on the upper hood surface. Fig. 11.

• Check that the hood is at the right height. Minor height adjustments

may be made with the screws U embodied in the brackets. Fig. 11.

• Tighten the two wall fixing screws R, through the two access holes

N provided on the inside of the hood then fix the lower sliding frame

to the hood with two screws O and washers. Fig. 11.

Fixing a furniture door to the visor

Before fixing the furniture door to the visor, please ensure the distance

distance between the plate and the upper edge of the cabinet door is

correct (depends on the thickness of the material and whether or not

there is an upper shelf). Fig. 6.

= 17

16 = 33

19 = 36

• Remove the grease filters. Fig. 3.

• Take off the visor G by turning the rear locking knobs H. Fig. 13.

Fig. 12