AEG COOKER HOOD DF 6160 운영 및 설치 매뉴얼 - 페이지 17

{카테고리_이름} AEG COOKER HOOD DF 6160에 대한 운영 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG COOKER HOOD DF 6160 21 페이지. Electrolux cooktop user manual
AEG COOKER HOOD DF 6160에 대해서도 마찬가지입니다: 작동 및 설치 지침 (21 페이지), 작동 및 설치 지침 (23 페이지)

페이지 인쇄

Spice rack

• If a spice rack is to be incorporated in front of the hood, a minimum

distance of 5 mm must be provided between the front edge of the

fume extractor hood and the spice rack wall (this air gap being

necessary for air circulation).

• The upper part of the spice rack rear wall should be detachable

(access for exhaust air hose or adjustment of furniture housing).

Installing the extractor hood in the wall unit - extraction version

(Recirculation version with charcoal filter)

• Fix the drilling template to the inside wall of the wall unit on the

right and left sides, and mark out and predrill Ø 2 mm mounting

holes as well as 2 x Ø 6 mm - 5 mm depth holes for the mounting

claws (installation aids).

• Fully withdraw the visor of the hood.

• Important: Detach and insert the grease filters only when the visor

is fully withdrawn.

Remove the grease filters. First remove the rear and then the front

grease filter.

• For 19 mm side walls, the spacer discs clipped in on the appliance

body must be taken out. Mount the hood with 4 or 6 x Ø 4 mm

screws. Fig. 11.

• Insert the hood in the furniture housing and engage both mounting

claws (installation aids) on the right and left sides in the side wall

of the wall unit and firmly hold the hood for further mounting.

Then fix the hood with the 4 or 6 x Ø 4 mm screws supplied.

• Refit the grease filters. Push-in the visor.

Fig. 11