Kohler 00885612759511 설치 매뉴얼 - 페이지 4

{카테고리_이름} Kohler 00885612759511에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler 00885612759511 45 페이지. Electronic bathroom sink faucet

1. Faucet Installation

NOTE: Before drilling the mounting hole, use the following

dimensions for proper placement:

A 1-1/4" (32 mm) minimum to 1-1/2" (38 mm) maximum

diameter mounting hole is required.

A minimum distance of 1-3/4" (44 mm) is required between the

back of the spout and the wall to allow access to the screw.

A 1-1/8" (29 mm) maximum distance is required between the

sink bowl edge and the base of the spout.

Install the Faucet

Determine the mounting-hole location.

Drill a hole through the mounting surface according to the

surface manufacturer's instructions.

Insert the spout with ﬂexible hoses and studs through the

mounting hole.

From under the sink, slide the rubber washer and metal washer

onto the studs.

Thread the nuts onto the studs and wrench-tighten to secure the

faucet to the mounting surface.

1386432-2-A

Rubber Washer

Metal Washer

Nuts

Water Inlet Hose

Sensor

Kohler Co.