Kohler 10373 설치 지침 - 페이지 2
{카테고리_이름} Kohler 10373에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler 10373 4 페이지. Showerhead with arm & flange
페이지 인쇄Remove the temporary nipple. Apply a ring of plumbers putty around
1
the back surface of the flange(2). Slide the flange over the shower
arm(3). Apply tape or sealant to the shower arm, and install the
3
shower arm into the shower ell(1). Tighten with a strap wrench. Push
the flange against the wall. Remove any excess putty.
2
Flush both water supplies through the shower arm for one minute
before the shower head is installed. Apply tape or sealant to the
exposed end of the shower arm. Tighten the showerhead(4) with a
4
strap wrench.
Remove the temporary nipple. Apply a ring of plumbers putty around
the back surface of the flange(6). Slide the flange over the shower
8
5
arm(8). Apply tape or sealant to the shower arm, and install the
shower arm into the shower ell(5). Tighten with a strap wrench.
6
10
9
Push the flange against the wall, tighten the screw(10) with the hex
7
wrench(9) to secure the flange. Remove any excess putty.
Flush both water supplies through the shower arm for one minute
before the shower head is installed. Apply tape or sealant to the
exposed end of the shower arm. Tighten the showerhead(7) with a
strap wrench.
1069817-2A-A