Kohler 1092606 서비스 키트 지침 - 페이지 2

{카테고리_이름} Kohler 1092606에 대한 서비스 키트 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler 1092606 12 페이지. Sprayhead and membrane

Spray Face

Remove the Spray Membrane

Pivot the spray face and use a 5/16" hex wrench to turn the screws

clockwise to disengage.

Repeat for all three screws.

Remove the spray face.

Carefully lift the spray membrane from the sprayhead. Use care to not

damage the spray membrane as it tears easily.

If you are only replacing the spray membrane, proceed to "Replace the

Spray Membrane" section, otherwise continue to "Remove the

Sprayhead" section.

Remove the Sprayhead

Insert a 1/4" hex wrench through the center of the sprayhead into the

ball joint.

Turn the ball joint clockwise, while holding the sprayhead stationary, to

remove the sprayhead and the clamp.

Remove the O-ring from the ball joint.

1083256-9-A

Membrane

Sprayhead

O-Ring

Sprayhead

Clamp

Kohler Co.