Kohler 4EFKD 설치 지침 - 페이지 3

{카테고리_이름} Kohler 4EFKD에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler 4EFKD 4 페이지.
Kohler 4EFKD에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (17 페이지)

페이지 인쇄

3.12 Connect

the

clear

(GM34883) to the siphon break cap using a hose

clamp (X-426-9) to secure. Route the tubing to a

convenient location. This allows the seawater to

drip into the bilge and not on the generator set.

3.13 Siphon break mounting varies with each

application. Generally, use brass or stainless

steel screws and mount the siphon break using

the mounting tabs.

(conduit-type) pipe clamp.

Note: Mount the siphon break in a location easily

accessable for inspection and servicing.

Note: Ensure that the siphon break cap is tight before

operating the generator set.

Restore the generator set to service.

4.1

Check that the generator set is OFF.

4.2

Reconnect the generator set engine starting

battery, the negative (--) lead last.

4.3

Reconnect the power to the battery charger, if

equipped.

4.4

Start the generator set and check for water leaks.

4.5

Stop the generator set.

4.6

Replace the sound shield's exhaust panel, door,

and roof.

Inspection/Maintenance

Service the siphon break during regular exhaust system

component inspection. See the generator set operation

manual for the service schedule.

Note: The generator set must not be running during the

siphon break inspection.

Remove the generator set from service.

1.1

Press the start/stop button to stop the generator

set. The engine stops.

1.2

Press the power button to turn off the controller.

1.3

Disconnect the power to the battery charger, if

equipped.

1.4

Disconnect the generator set engine starting

battery, the negative (--) lead first.

TT-1509

4/14

flexible

plastic

tubing

Otherwise, use a nylon

Inspect the siphon break.

2.1

Remove the retaining cap and remove the reed

valve for inspection. See Figure 5.

2.2

Use a mild detergent to remove residue and

oxidation from the reed valve.

2.3

Clear blockage from the reed valve opening.

2.4

Replace the siphon break if the reed valve is

cracked or if the reed valve material has hardened

or deteriorated.

2.5

Install the reed valve into the mounting base with

the valve downward. See Figure 5, item 3.

2.6

Install and only finger tighten the retaining cap. Do

not overtighten it.

1. Cap

2. Siphon reed valve

3. Mounting base

Figure 5 Siphon Break

Restore the generator set to service.

3.1

Check that the generator set is OFF.

3.2

Reconnect the generator set engine starting

battery, the negative (--) lead last.

3.3

Reconnect the power to the battery charger, if

equipped.

Parts List

Siphon Break Kit

Kit: GM60007-KP1

Qty. Description

Grommet, round

Hose, 0.63 in. ID (11.5 in.)

Hose, 0.63 in. ID (8.0 in.)

Clamp, hose (0.69/1.25 in.)

Valve, siphon break

Connector, hose

Tubing, clear flexible plastic

Clamp, hose (0.25/0.70 in.)

Unique Parts

X-284-7

X-312-16

X-312-61

X-426-12

GM32985

344934

GM34883

X-426-9