Kohler 5EKD 설치 지침 매뉴얼 - 페이지 5

{카테고리_이름} Kohler 5EKD에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler 5EKD 17 페이지.
Kohler 5EKD에 대해서도 마찬가지입니다: 설치 지침 (4 페이지)

Install the relay in the junction box.

6.1

Use a 5/16 in. socket, 1/4 in. drive to remove the

junction box cover.

6.2

Place a rag inside the junction box to catch any

filings.

6.3

Drill a 3/16 in. hole at the location shown in

Figure 11.

6.4

Remove the rag and any drill filings from inside of

the junction box.

6.5

Mount the relay (GM49746) at the location shown

in Figure 12 using a screw (X-50-1) and nut

(X-70-3).

6.6

Connect the relay-connector end of the new wiring

harness (GM90471) to the new relay (GM49746).

6.7

Use a 5/16 in socket, 1/4 in. drive to reinstall the

junction box cover.

inch

1. 3/16 in. hole

(1 in. down from top edge and 1 in. over from pem stud)

Figure 11 Hole Location for Relay (Inside Junction

Box)

TT-1617

12/13

GM40265-D

1. Relay (GM49746), screw (X-50-1), and nut (X-70-3)

Figure 12 Relay Location (Inside Junction Box)

GM40265-D