Kohler 72218T-B7-CP 설치 및 관리 매뉴얼 - 페이지 11

{카테고리_이름} Kohler 72218T-B7-CP에 대한 설치 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Kohler 72218T-B7-CP 26 페이지. Response electronic kitchen faucet

Sensor LEDs

传感器各色LED灯

Faucet Operation

Rotate the handle outward to the open position to start water ﬂow. The handle

LED will illuminate to indicate that the sensor is functioning.

Adjust the handle to the desired water temperature.

Wave your hand under the spout to turn the water OFF.

Wave your hand under the spout again to restart water ﬂow.

NOTE: Some objects that are clear and certain colors are not detectable by the sensor.

Always use your hand for sensor testing.

If needed, refer to the "Handle LED Adjustment" section for more information.

NOTE: For extended periods of nonuse, the handle should be returned to the closed

(upright) position. The handle LED will turn OFF, indicating that water ﬂow is not

available.

LED Indicators

Handle LED: Illuminates when the sensor is active.

Circuit board LED: Indicates there is power to the circuit board.

NOTE: The sensor LEDs are only visible inside the spout when the spray hose is

extended.

Green sensor LED: Indicates there is power to the sensor.

Yellow sensor LED: Illuminates when an object has been detected by the sensor.

Features

Automatic shut-off: After four minutes of inactivity, the water will automatically

shut OFF.

Sensor override: In the event of power loss, the sensor function can be bypassed

by turning in the override feature on the solenoid valve. The faucet can then be

operated manually.

Kohler Co.

Sensor

Manual Override

传感器

手动控制切换装置

Handle LED

手柄LED灯

Open Position

开启位置

1198298-2-C