AEG DD 8891 작동 및 설치 지침 - 페이지 11

{카테고리_이름} AEG DD 8891에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG DD 8891 21 페이지. Aeg ventilation hood user manual
AEG DD 8891에 대해서도 마찬가지입니다: 작동 및 설치 지침 (21 페이지), 작동 및 설치 지침 (23 페이지), 작동 및 설치 지침 (21 페이지), 작동 및 설치 지침 (21 페이지), 작동 및 설치 지침 (21 페이지)

Maintenance and Care

• The hood must always be disconnected from the electricity

supply before beginning any maintenance work.

Cleaning the hood

• Clean the outside of the hood using a damp cloth and a solution of

water and mild washing up liquid.

• Never use corrosive, abrasive or flammable cleaning products or

products containing bleach. .

• Never insert pointed objects in the motor's protective grid.

• Only ever clean the switch panel and filter grill using a damp cloth

and mild washing up liquid.

• It is extremely important to clean the unit and change the filters at

the recommended intervals. Failure to do so will cause grease

deposits to build up that could constitute a fire hazard.

Metal grease filter

• The purpose of the grease filters is to absorb grease particles which

form during cooking and it must always be used, either in the

external extraction or internal re-circulation function.

Attention: the metal grease filters must be removed and washed,

either by hand or in the dishwasher, every four weeks.

Removing the metal grease filter

• First, push the metal grease filter stop backwards, then extract the

filter, pulling downwards. Fig. 5.

Hand washing

Soak grease filters for about one hour in hot water with a grease¬

loosening cleaner, then rinse off thoroughly with hot water. Repeat

the process if necessary. Refit the grease filters when they are dry.

Dishwasher

Place grease filters in the dishwasher. Select most powerful washing

programme and highest temperature, at

least 65°C. Repeat the process. Refit the

grease filters when they are dry.

When washing the metal grease filter in

the dishwasher a slight discolouration of

the filter can occur, this does not have any

impact on its performance.

• Clean the inner housing using a hand hot

solution only(never use caustic

detergents, abrasive powders or

brushes).