A-Neuvideo ANI-0108HBC 사용 설명서 - 페이지 6

{카테고리_이름} A-Neuvideo ANI-0108HBC에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. A-Neuvideo ANI-0108HBC 8 페이지. Hdmi 1x8 splitter over cat5e/6 extender

페이지 인쇄

NEUVIDEO

TX EDID Description

Under normal circumstances, a source device (digital and analog) will require information about a connected device/display to assess

what resolutions and features are available. The source can then cater its output to send only resolutions and features that are compatible

with the attached device/display. This information is called EDID (Extended Display Information Data) and a source device can only

accept and read one EDID from a connected device/display. Likewise, the source can only output one resolution for use by a connected

device/display.

The EDID switch allows for EDID learning or to pre-set an EDID to encourage a "handshake" between the display and

source.

Attention: Please confirm the extender is working normally, when you want to modify the new EDID to source, Toggle

the EDID switcher to the corresponding number first, then plug the Transmitter power again. The extender will send

the new EDID to source.

EDID TABLE:

POSITION

EDID DESCRIPTION

1080p, 2CH AUDIO

1080p, DOLBY/DTS 5.1

1080p, HD AUDIO

1080i, 2CH AUDIO

1080i, DOLBY/DTS 5.1

1080i, HD AUDIO

3D,1080p, 2CH AUDIO

3D, 1080p,DOLBY/DTS 5.1

RX EDID Description

RECOMMENDED EQ SETTINg

POSITION

CABLE LENgTH

0 (MIN)-2

under 15m (49.5ft)

3-4

15-30m (49.5 ft - 99ft)

5-6

30-40m (99ft - 132ft)

7(MAX)

40-50m (132ft – 164ft)

POSITION

EDID DESCRIPTION

3D,1080p, HD AUDIO

Copy the HDMI loop out EDID

1080p, 2CH AUDIO

If you see flickering or blinking image on the display, adjust the EQ

switch to improve the cable skew. MAX stands for the strongest

HDMI signal level for the longest possible transmission length

while MIN stands for the weakest HDMI signal level for short

transmission length. Adjust the signal level from MIN to MAX until

desired video quality is displayed.

EDID Description