AEG Perfekt Glide-24 사용 설명서 - 페이지 9

{카테고리_이름} AEG Perfekt Glide-24에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG Perfekt Glide-24 17 페이지. Built-in range hood
AEG Perfekt Glide-24에 대해서도 마찬가지입니다: 사용 설명서 (18 페이지), 사용 설명서 (17 페이지), 사용 설명서 (20 페이지)

페이지 인쇄

1. Table of Contents

Cabinet Preparation for Hood Support

The range hood should be mounted at a distance of 600mm

from an electric or induction cooktop, and 762mm above a

gas cooktop for safety and optimum performance.

Use the diagram below for proper placement of ductwork

and electrical cutout in cabinet. For a non-ducted

installation, DO NOT cut a duct access hole.

Warning! When cutting or drilling into wall or cabinet, be

careful not to cut existing electrical wiring.

1. If the bottom of the cabinet is recessed above the

bottom of the cabinet door, then it is necessary to

install wood strips on each side of the recessed area

on the bottom of the cabinet where the range hood

will be mounted. The wood strips should line up with

the 4 keyhole slots on the top of the range hood.

If you install the hood with a duct,

you will need to provide a hole for

the duct. Please use the template

provided to locate the hole.

P a g e