AEG protect d. 2000 설치 및 운영 지침 매뉴얼 - 페이지 21

{카테고리_이름} AEG protect d. 2000에 대한 설치 및 운영 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG protect d. 2000 25 페이지. Fume extractor hood

Display warning on saturation of metal grease

filter

After 30 operating hours the letter (F- grease filters) will

flash on and off on the display (D) in alternation with the

fan speed setting. Fig. 14

This means that the metal grease filters need to be

cleaned! (This operation should be carried out every 30

operating hours!).

Proceed as follows to remove and clean the metal filters:

Switch of the fan motor by pressing the

Take the precaution of removing my cartridge fuses from

their fuse holders or tripping the automatic circuit

breaker to ensure the fan motor cannot be switched on

accidentally.

Remove the metal filter.

Clean the inner housing using a hot detergent solution

only (never use caustic detergents, abrasive powders or

brushes).

Fig. 14

Fig. 14.

Fig. 14

button.